The Ultra Scale Master® Pro is an affordable and
portable area takeoff and digitizing system.
The Ultra Scale Master® Pro allows you to
measure plans at your office or on the job site without the need for additional
computing devices or software.
The ergonomic design with large targeting window
allows you to accurately measure and compute areas, segment lengths, perimeters,
and volumes for simple or complex polygons, polylines, irregular shapes, arcs
and circles.
72 built-in architectural and engineering scales
allow you to measure plans and drawing up to 24" x 36" in size. Four
custom scales allow you to measure out of scale drawings.
The Ultra Scale Master® Pro can operate as a
stand alone digital area takeoff tool, or you can connect it to your PC to
transfer measurements into any estimating and spreadsheet program that accept
text input from a number pad or keyboard. It also can send digitized (x,y)
coordinates to takeoff software programs like the Smart Takeoff! graphic
digitizing software.
The Optional Smart Takeoff!™software provides graphic representation of the digitized coordinates for
the Ultra Scale Master® Pro, and verifies quantities while minimizing, or even
eliminating, errors of omission and miscalculation.
The Ultra Scale Master® Pro is ideal for
construction trades such as concrete, flooring/tile, paving, roofing,
landscaping, electrical, plumbing and small site excavation.
Features
Operating Modes
Stand Alone Operation
Measure and display line lengths, areas, perimeters, volume, wall areas, arc
lengths, radius and diameter without the use of a PC.
PC Input Mode
Send displayed values to your spreadsheets and estimating software programs
via supplied USB cable (no special USB driver software needed).
Digitizer (x,y) Coordinate Entry
Send coordinates to graphic digitizing software like the Smart Takeoff!
program.
Measuring Shapes
Simple or Complex Polygons
Measure all polygon points and automatically find area, line lengths,
perimeter and volume.
Rooms, walls concrete pads, parking lots, floor coverings,
and small site excavations
Polylines
Measure two or more points and automatically get segment length, total
length and wall area.
Walls, foundations, piping, electrical, and other linear
measurements
Irregular Shapes
Measure all points on the curved shape and automatically find area,
perimeter and volume.
Pools, planting beds, curbing, and water proofing
Arcs
Measuring the starting point, high point and finishing point of the
arc and automatically get area, perimeter, arc length, volume, and wall
area.
Arched windows and doorways
Circles
Select any three point on the circle and automatically get area, perimeter,
volume, radius and diameter.
Columns and roundabouts
Additional Features
Ergonometric shaped measuring device and large
targeting window gives you point-to-point measuring accuracy
Easy to read LCD display
72 built-in scales or create custom scales for
out-of-dimension drawing and plans
Imperial or Metric Mode
Change units of measure of any displayed value
at any time
Easily recall line lenghts and computed
measurements for current measured shape
Enter a stored Height and get volume and wall
area calculations
Operates on 4 –AAA batteries (included) or
from USB Cable when connected to PC
Automatic Shut-Off saves battery life
Preference Settings:
Display Total Measurements or last segment
measured
Beep sound control
US/Euro value display
PC Send Display after data is sent to the PC
PC data terminating command settings allow you
to control spreadsheet cell direction
Set Right Hand or Left Hand Digitizer mode
USB Send Delay control for slower computers
Specifications
What is in the box:
Measuring Device (Puck)
4-AAA batteries
Padded Leatherette Puck Case
10 ft. USB Cable
Reflector Bars
Quick Setup Sheet
Quick Reference Guide
Fully Illustrated User’s Guide
Durable Molded Carrying Case
Shipping Weight: 7.75 lbs (3.5 kG)
Operating Modes:
Stand Alone Operation
PC Input Mode
Digitizer (x,y) Coordinate Entry
(optional software is required)
Operating
Systems Supported:
Windows® 2000 or XP
Computer Interface: USB 1.1 and 2.0 compatible HID
Mode via
supplied 10 ft. (3.048 m) cable
Bar Specifications:
Footprint
25.63 x 37.63 x 1.40 inch (651 x 956 x 36 mm)
Active Measurement Area
24 x 36 inch (610 x 914 mm) (re-configurable)
Weight
2.31 Lbs (1049 grams)
Puck Specifications:
Footprint:
3.79 x 7.63 x 1.13 inch (98.4 x 193.6 x 28.5 mm)
Weight:
7 oz (200 grams)
Power Source:
USB power when connected to PC
4 “AAA” batteries when used as stand alone device
Range:
Up to 36 inches
Accuracy:
±0.040 inch (± 0.1016 cm)
Operating Temperature:
41 to 104°F (5 to 40°C)
Storage Temperature:
14 to 122°F (-20 to 60°C)
Humidity Range:
0 to 95%, non-condensing
